Extend with Plugins

Plugins allow you to extend Bridgetown’s behavior to fit your needs. You can write plugins yourself directly in your website codebase, or install gem-based plugins and themes for a limitless source of new features and capabilities.

Be sure to check out our growing list of official and third-party plugins for ways to jazz up your website.

Whenever you need more information about the plugins installed on your site and what they’re doing, you can use the bridgetown plugins list command. You can also copy content out of gem-based plugins with the bridgetown plugins cd command. Read the command reference for further details.

Table of Contents #

• Setup
• Introduction to the Builder API
  • Local Custom Plugins
  • Gem-based Plugins
• Internal Ruby API
• Plugin Categories
  • Helpers
  • Tags
  • Filters
  • HTTP Requests and the Resource Builder
  • Hooks
  • HTML & XML Inspectors
  • Generators
  • Permalink Placeholders
  • Resource Extensions
  • Front Matter Loaders
  • Commands
  • Converters
    • Priority Flag
• Cache API
• Zeitwerk and Autoloading
• Creating a Gem

Setup #

There are three methods of adding plugins to your site build.

1. Within your site’s root folder, there’s a plugins folder. Write your custom plugins and save them here. Any file ending in .rb inside this folder will be loaded automatically before Bridgetown generates your site. Most plugins you write will likely be using the Builder API, so you can add them in plugins/builders.

2. Add gem-based plugins to your Gemfile by running a command such as:

   bundle add bridgetown-feed
   

   and then adding an init statement to your config/initializers.rb file (such as init :"bridgetown-feed").

3. Run an automation which will install one or more gems along with other set up and configuration:

   bin/bridgetown apply https://github.com/bridgetownrb/bridgetown-cloudinary
   

Introduction to the Builder API #

The Builder API (with its various DSLs) is typically the approach you’ll use to write Bridgetown plugins.

Local Custom Plugins #

The SiteBuilder class in your plugins folder provides the a superclass you can inherit from to create a new builder. In plugins/builders, you can create one or more subclasses of SiteBuilder and write your plugin code within the build method which is called automatically by Bridgetown early on in the build process (specifically during the pre_read event before content has been loaded from the file system).

# plugins/builders/add_some_tags.rb
class Builders::AddSomeTags < SiteBuilder
  def build
    liquid_tag "cool_stuff", :cool_tag
  end

  def cool_tag(attributes, tag)
    "This is so cool!"
  end
end

Builders provide a couple of instance methods you can use to reference important data during the build process: site and config.

So for example you could add data with a generator:

class Builders::AddNewData < SiteBuilder
  def build
    generator do
      site.data.new_data = { new: "New stuff" }
    end
  end
end

And then reference that data in any template:

{{ site.data.new_data.new }}

   output: New stuff

Gem-based Plugins #

For a gem-based plugin, all you have to do is subclass directly from Bridgetown::Builder, then define it within your plugin initializer (along with any other configuration set up).

# lib/my_nifty_plugin/builder.rb
module MyNiftyPlugin
  class Builder < Bridgetown::Builder
    def build
      this_goes_to = config.my_nifty_plugin.this_goes_to_11
      # do other groovy things
    end
  end
end

# lib/my_nifty_plugin.rb
Bridgetown.initializer :my_nifty_plugin do |config, api_key: ''|
  config.my_nifty_plugin ||= {}
  config.my_nifty_plugin.this_goes_to_11 ||= 11
  config.my_nifty_plugin.api_key = api_key 

  config.builder MyNiftyPlugin::Builder
end

Accepting keyword arguments is optional. The above example shows how you can use a keyword parameter to allow users to pass information from their initializers.rb file into your plugin. This example allows users to provide a api_key parameter from their initializer.rb file, and for this example it defaults to an empty string.

Below shows how a user could set the api_key parameter from within their initializers.rb. Refer to the initializers documentation for more about initializers..

# config/initializers.rb
Bridgetown.configure do |config|
  init :my_nifty_plugin do
    api_key "some-api-key"
  end
end

Read further instructions below on how to create and publish a gem.

Internal Ruby API #

When writing a plugin for Bridgetown, you may sometimes be interacting with the internal Ruby API. Objects like Bridgetown::Site, Bridgetown::Resource::Base, Bridgetown::GeneratedPage, etc. Other times you may be interacting with Liquid Drops, which are “safe” representations of the internal Ruby API for use in Liquid templates.

Documentation for Bridgetown’s class hierarchy is available on our API website.

The simplest way to debug the code you write is to run bridgetown console and interact with the API there. You can then copy working code into your plugin, or test out new ideas before committing them to your plugin code. You can also write binding.irb at any point in your code, and you’ll be dropped into a console when execution pauses at that point.

Plugin Categories #

There are several categories of functionality you can add to your Bridgetown plugin:

Helpers #

For Ruby-based templates such as ERB, Serbea, etc., you can provide custom helpers which can be called from your content and design templates.

Tags #

For Liquid-based templates, you can provide tags (aka “shortcodes”) which can be called from your content and design templates.

Filters #

You can provide custom Liquid filters to help transform data and content.

HTTP Requests and the Resource Builder #

Easily pull data in from external APIs, and use a special DSL to build resources out of that data.

Hooks #

Hooks provide fine-grained control to trigger custom functionality at various points in the build process.

HTML & XML Inspectors #

Post-process the HTML or XML output of resources using the Nokogiri Ruby gem and its DOM-like API.

Generators #

Generators allow you to automate the creating or updating of content in your site using Bridgetown’s internal Ruby APIs.

Permalink Placeholders #

Define lambdas which will be run for any matching placeholders within a permalink.

Resource Extensions #

Add new functionality to the resource objects in your site build.

Front Matter Loaders #

Add new types of front matter to the resource objects and layouts in your site.

Commands #

Commands extend the bridgetown executable using the Thor CLI toolkit.

Converters #

Converters change a markup language from one format to another.

Priority Flag

You can configure a plugin (builders, converters, etc.) with a specific priority flag. This flag determines what order the plugin is loaded in.

The default priority is :normal. Valid values are:

:lowest, :low, :normal, :high, and :highest. Highest priority plugins are run first, lowest priority are run last.

Examples of specifying this flag:

class Builders::DoImportantStuff < SiteBuilder
  priority :highest

  def build
    # do really important stuff here
  end
end

class Builders::CanWaitUntilLater < SiteBuilder
  priority :low

  def build
    # stuff that'll get run later (after the really important stuff)
  end
end

Cache API #

Bridgetown features a Caching API which is used both internally as well as exposed for plugins and components. It can be used to cache the output of deterministic functions to speed up site generation.

Zeitwerk and Autoloading #

Bridgetown uses an autoloading mechanism provided by Zeitwerk, the same code loader used by Rails and many other Ruby-based projects. Zeitwerk uses a specific naming convention so the paths of your Ruby files and the namespaces/modules/classes of your Ruby code are aligned. For example:

plugins/my_plugin.rb         -> MyPlugin
plugins/my_plugin/foo.rb     -> MyPlugin::Foo
plugins/my_plugin/bar_baz.rb -> MyPlugin::BarBaz
plugins/my_plugin/woo/zoo.rb -> MyPlugin::Woo::Zoo

You can read more about Zeitwerk’s file conventions here.

In addition to the plugins folder provided by default, you can add your own folders with autoloading support! Simply add to the autoload_paths setting in your config YAML:

autoload_paths:
  - loadme

Now any Ruby file in your project’s ./loadme folder will be autoloaded. By default, files in your custom folders not “eager loaded”, meaning that the Ruby code isn’t actually processed unless/until you access the class or module name of the file somewhere in your code elsewhere. This can improve performance in certain cases. However, if you need to rely on the fact that your Ruby code is always loaded when the site is instantiated, simply set eager to true in your config:

autoload_paths:
  - path: loadme
    eager: true

There may be times when you want to bypass Zeitwerk’s default folder-based namespacing. For example, if you wanted something like this:

plugins/builders/tags.rb   -> Builders::Tags
plugins/helpers/hashify.rb -> Hashify

where the files in builders use a Builders namespace, but the files in helpers don’t use a Helpers namespace, you can use the autoloader_collapsed_paths setting:

autoloader_collapsed_paths:
  - plugins/helpers

And if you don’t want namespacing for any subfolders, you can use a glob pattern:

autoloader_collapsed_paths:
  - top_level/*

Thus no files directly in top_level as well as any of its immediate subfolders will be namespaced (that is, no TopLevel module will be implied).

Creating a Gem #

The bridgetown plugins new NAME command will create an entire gem scaffold for you to customize and publish to the RubyGems.org and NPM registries. This is a great way to provide themes, builders, and other sorts of add-on functionality to Bridgetown websites. You’ll want to make sure you update the gemspec, package.json, README.md, and CHANGELOG.md files as you work on your plugin to ensure all the necessary metadata and user documentation is present and accounted for.

Bridgetown plugins should provide an initializer so that they can be easily required and configured via the user’s configuration block within config/initializers.rb. It’s a good practice to ensure at least simple configuration options can alternatively be provided using YAML in bridgetown.config.yml.

Make sure you follow these instructions to integrate your plugin’s frontend code with the users’ esbuild setup. Also read up on Source Manifests if you have layouts, components, resources, static files, and other content you would like your plugin to provide.

You can also provide an automation via your plugin’s GitHub repository by adding bridgetown.automation.rb to the root of your repo. This is a great way to provide advanced and interactive setup for your plugin. More information on automations here.

When you’re ready, publish your plugin gem to the RubyGems.org and NPM registries. There are instructions on how to do so in the sample README that is present in your new plugin folder under the heading Releasing. Of course you will also need to make sure you’ve uploaded your plugin to GitHub so it can be included in our Plugin Directory and discovered by Bridgetown site owners far and wide. Plus it’s a great way to solicit feedback and improvements in the form of open source code collaboration and discussion.

As always, if you have any questions or need support in creating your plugin, check out our community resources.

gem "my_plugin", :path => "../my_plugin"

"dependencies": {
  "random-js-package": "2.4.6",
  "my_plugin": "../my_plugin"
}

Themes